Hissig Gompen
Senior Member
Here's my baby, 5 drums and 7 cymbals (including two sets of hats) using just two cymbal stands. It's set up for max comfort -
close offset toms, xhat+ride over the bass drum (I cut the rod of the xhat so I could mount the ride as low as possible),
and the slave pedal to the left of the hihat pedal to get the hats nice and close. Toms are 10", 12" and 14" so they are easy to fit into place.
I thought that I'd need some larger and deeper toms for metal, but these work just fine. The limiting factors seem to be
the stock reso-heads and my tuning skills, not the drums themselves.
Drums:
14"x5" snare
10/12/14" toms (don't remember the depths lol)
20"x18" kick
Cymbals:
14" Zildjian A Custom hats (actually a Mastersound top over a regular bottom, which I presume is the same thing as a regular A-custom)
12" Saluda china (a bit too intense and trashy for my needs. I wanna try to stack it with a 10" splash at some point)
18" Istanbul Samatya crash (very good for the price, I used it as my only cymbal for 6 months)
12" Bosphorus Gold splash
18" Saluda china
20" Paiste Alpha Full Ride (like the bell, the bow not so much. Also crashing it is too overpowering to use regularily).
14" Paista Alpha top/Paiste 502 bottom xhat (these aren't even close to the A customs)
Hw:
Pearl P122TW - to be replaced by my newly aquired Axis AL2 when I've gotten used to the feel
Fame 2-legged hh stand
Fame Snare stand
Old tama single braced straight stand
Old Gibraltar boom stand
Old pearl cymbal arm mounted on the bass drum
2x Fame cymbal holders+clamps
Ghetto xhat comprised of a tube, two clamps and a sonor xhat holder
Fame throne w/backrest
The Fame hardware is good value for money, at least for a kit not used for gigging. I haven't fiddled around with it enough to know if it's road-safe.
The throne isn't great, I want to replace that sometime soon, probably gonna get a First Chair w/ergo rider seat, hydraulix and a backrest.
I also want to replace the pearl cymbal arm and the tama stand at some point, as well as getting a crash to put at the far right side.
close offset toms, xhat+ride over the bass drum (I cut the rod of the xhat so I could mount the ride as low as possible),
and the slave pedal to the left of the hihat pedal to get the hats nice and close. Toms are 10", 12" and 14" so they are easy to fit into place.
I thought that I'd need some larger and deeper toms for metal, but these work just fine. The limiting factors seem to be
the stock reso-heads and my tuning skills, not the drums themselves.
Drums:
14"x5" snare
10/12/14" toms (don't remember the depths lol)
20"x18" kick
Cymbals:
14" Zildjian A Custom hats (actually a Mastersound top over a regular bottom, which I presume is the same thing as a regular A-custom)
12" Saluda china (a bit too intense and trashy for my needs. I wanna try to stack it with a 10" splash at some point)
18" Istanbul Samatya crash (very good for the price, I used it as my only cymbal for 6 months)
12" Bosphorus Gold splash
18" Saluda china
20" Paiste Alpha Full Ride (like the bell, the bow not so much. Also crashing it is too overpowering to use regularily).
14" Paista Alpha top/Paiste 502 bottom xhat (these aren't even close to the A customs)
Hw:
Pearl P122TW - to be replaced by my newly aquired Axis AL2 when I've gotten used to the feel
Fame 2-legged hh stand
Fame Snare stand
Old tama single braced straight stand
Old Gibraltar boom stand
Old pearl cymbal arm mounted on the bass drum
2x Fame cymbal holders+clamps
Ghetto xhat comprised of a tube, two clamps and a sonor xhat holder
Fame throne w/backrest
The Fame hardware is good value for money, at least for a kit not used for gigging. I haven't fiddled around with it enough to know if it's road-safe.
The throne isn't great, I want to replace that sometime soon, probably gonna get a First Chair w/ergo rider seat, hydraulix and a backrest.
I also want to replace the pearl cymbal arm and the tama stand at some point, as well as getting a crash to put at the far right side.
Attachments
Last edited: