Andy
Honorary Member
Just had to post these up. We had some superb goncalo alves boards "resting" in our shell shop for 7 years, so decided to craft 5 very different snare drums featuring this superb wood species. Two have been held back for the London Drum Show, the other 3 are already off to their new homes
Instead of going our default route of In-Tense series specification, we decided to use a combination of features from In-Tense series & the up coming new Tour series drums to create something distinctive that works perfectly with the wood species.
Spec's:
From In-Tense series -
6mm thin stave shells with integral machined reinforcement rings, French polished & waxed. Ultra low mass T6 aluminium lugs. M5 (fine tune) tension screws.
From the new "Tour" series -
Generous half round over edges. Deeper & wider snare beds. S hoops. Puresound Equaliser wires. Latest Nickelworks strainer.
Instead of going our default route of In-Tense series specification, we decided to use a combination of features from In-Tense series & the up coming new Tour series drums to create something distinctive that works perfectly with the wood species.
Spec's:
From In-Tense series -
6mm thin stave shells with integral machined reinforcement rings, French polished & waxed. Ultra low mass T6 aluminium lugs. M5 (fine tune) tension screws.
From the new "Tour" series -
Generous half round over edges. Deeper & wider snare beds. S hoops. Puresound Equaliser wires. Latest Nickelworks strainer.